High engine subfamily | Cylindre/Piston/Culasse |
Cooling | Liquide |
Studed cylinder head | Oui |
Cylinder head architecture | Sectional |
Cylinder material | Fonte |
Number of admission transfers | 5 |
Exhaust type | Ovale |
Exhaust Mount Type | A emmanchement |
Cylinder head material | Aluminium |
Piston material | Aluminium moulé |
Piston diameter | 39.95 |
Piston pin diameter in mm | 12 |
Piston cap | Domed |
Number of piston rings | 2 |
Piston ring material | Fonte chromée |
Piston ring section | Rectangulaire |
Segment lug | Recouvert |
Gaskets supplied | Oui |
Spare part: cylinder head gaskets | 500128 |
Spare part: piston | 500125 |
If you are looking for reliability and power, here is the Stage6 Streetrace cast iron cylinder kit 50cc Euro3.
The last generation 50cc kit made by the German firm is dedicated to a daily use.
The five transferts d'admission and the simple exhaust port timing largely better performances than the original one. The cast iron cylinder is delivered with a 12mm axle bi-piston rings cylinder and a two-part aluminium cylinder head aluminium assure reliability for an intensive use and low maintenance.
Powerful and torquy, this cylinder kit perfectly joins reliability and performance, and will be your daily partner at the hands of your vehicle.
To take the most of its capacities, we recommend to associate a 19mm carburetor and a Sport range exhaust.
With the adapted parts, it will be able to develop up to 8 bhp, that is 3 to 4 more bhp than the original, and 1 or 2 more bhp than other 50cc kits.
Contents of the pack:
cylinder 50cc diam.40mm
Piston Axle 12mm bi-piston rings,
high-compression aluminium cylinder head
Gaskets packet
With a 50cc engine size, this cast ironcylinder kit Stage6 “Streetrace” 50cc is indeed road approved.
For the mounting, we recommand beforehand to clean up the engine before mounting back, to check the state of the parts and to install a new spark plug and a new needle bearing. Also think about changing your carburetor settings to prevent any tightening.
The cylinder squish has already been made by manufacturer, so that you only have one base gasket. About the running in, a minimum of 300km with a 3% oil mixture will give you robustness and durabilit